technical datas:
| measuring range |
0,0 - 99,9 % H2O (adjustable) |
| resolution: |
0,1% |
| dimension: |
approx. 180 x 80 x 35 mm |
| weight: |
approx. 0,43 kg |
non-destructive measurements - done in seconds- just press it on the material and read off the average moisture content till a depth of approx. 1 cm
- material group setting by means of a membrane-type keypad
- the adjusted material group can always be seen in the display
- microprocessor controlled measring with automatic zero point correction
- up to 10 customer specific linearisation curves with 8 points each possible
- storage for 100 moisture values
- automatic calculation of maximum, average and minimum value
- with aluminium case
lower part for better protection against mechanical and elecrtostatical strength
- the instrument
works with a standard 9V blockbatterv, we strongly recommend the lithium
battery type U9VL with at least 30 hours using time
and at least 10 years
lifetime without using
- for testing and calibrating we recommend our test module PE30-7
software DMI-Controller inc. RS232 interface cable for PC
- calibration in connection with the test modules PE05 and PE30
- changing of customer specific calibration curves, the curves can be stored on the hard disc
- changing of measuring parameters
- measurements can be transfered permanently to the PC, the values will be displayed graphicaly and can be stored on the hard disc
- stored values in the instrument can be transfered to the PC, the values will be displayed graphicaly and can be stored on the hard disc
- screed moisture measurement
- capacitive measuring principle
- drying method
- CM - method
- conductance measuring princilpe
- compare of capacitive and conductance measuring principles
- indoor climate
- air moisture, rel.humidity, dew point
- surface temperatur, walltemperature
- moisture meter vor caravans, moble homes - an important topic
- operating instructions (pdf-File)
