| measuring range: | 0,0 - 50,0% H2O |
| resolution: | 0,1% |
| dimension of the instrument: | 150 x 80 x 30 mm |
| dimension of the probe: | Ø10 x 420 mm |
for measuring in
paper bales, its necessary to drill a hole first and than to put the probe
into the ball.
Because of the measuring
principle, the measuring value depends on the density of the pressed bales.
After comparing the results with the drying method, a costumer specific
calibration is possible.
- the measuring field penetrates approx. 5 cm around the top of the sensor
- material group setting by means of a membrane-type keypad
- the material group set can always be seen in the display
- the calibration curves can be changed by means of a membrane-type keypad
- microprocessor controlled measring with automatic zero point correction
- the meter works with a standard 9V block battery
- for testing we recommend our test modul PE50R
